Shock the Pool, Not the Septic System!
Posted: Thursday, May 15, 2008
by Gil Strachan
Electrospec Home Inspection Services
- Do you know what a septic system is and how it works?
- Do you know what kind of soil absorption area you have and how it works?
- Do you know what causes septic systems to fail?
- Do you know what it costs to replace a faulty septic system?
- Do you know that a faulty septic system creates health hazards and pollutes the ground water.
10 HELPFUL HINTS FOR MAINTAINING YOUR SEWAGE SYSTEM
1. Have the septic tank pumped out every 2-3 years. This will remove the accumulated sludge and scum which would otherwise reach the tile field and cause blockage resulting in a malfunctioning sewage system and costly repairs. This is the single most effective means of ensuring a long-lasting sewage system.
2. It is always wise to practice water conservation.
3. Use soaps and detergents which are low in phosphates. Most automatic dishwashing detergents contain high concentrations of phosphates.
4. Do not flush hazardous chemicals such as paints, varnish, thinners, waste oil, pesticides, photographic solutions, etc.
5. Do not flush coffee grinds, dental floss, disposable diapers, kitty litter, sanitary napkins, tampons, cigarette butts, condoms, fat, grease or oil, paper towels, etc.
6. Commercial septic tank additives are not necessary and are not recommended.
7. Do not allow vehicles to including snow machines and ATV's to park on or drive over your sewage system.
8. Divert roof drains, surface water, sump pumps and house footing drains away from the sewage system.
9. Sewage systems should have a good cover of grass, ventilation and sunlight. Trees and shrubs should not be planted over sewage systems. However, trees and shrubs planted between your septic system and a water course would be beneficial to the environment.
10. Be alert to these warning signs:
Following these hints, and observing these warning signs will help to ensure a long-lasting sewage system, avaoid expensive repairs or replacements, and protect everyone's water supply.
THE INSIDE STORY:
1. Organic solid material floats to the surface and forms a layer of what is commonly called "scum". Bacteria in the septic tank biologically convert this material to liquid.
2. Inorganic or inert solid materials and the by-products of bacterial digestion sink to the bottom of the tank and form a layer commonly called "sludge".
3. Only fairly clear water should exist between the scum and sludge layers. This water fills the second chamber of the tank where it becomes even more clear. It is this clear water - and only this clear water - that should be allowed to overflow from the tank into the drainage tiles in the absorption area, commonly called "the field" or "the bed" or sometimes "leaching field".
This Article has been viewed 854 times. (Not updated in real-time.)
Top-level comments on this article: (1 total)yes this was a very good article thanks ray
We want your comments! If you can read this, you don't have javascript enabled, so you can't use this comment system. Please enable javascript.